AU$264.44 - AU$276.97
Incorrect or missing product information? Let us know
Please select the issue
Your feedback has been received! Thank you for helping us improve our site.
The latest version of the popular Bont Riot MTB features a Boa closure as well as a 'Z Form' hook-and-loop strap on the forefoot so that you can ensure a comfortable fit and make minor adjustments on the go. The closures have been configured to distribute pressure evenly across the foot, minimising 'hot spots.' The sole has been designed so that it is stiff enough for efficient power transfer but also has a sturdy tread that doesn't retain dirt so the shoes are stable for scrambling over mud and roots.
If you are an off-road rider looking for a stylish shoe in a range of outstanding colours, the Riot+ MTB delivers superb comfort and performance at a competitive price.
This cycling shoe is the most heat moldable shoe on the market today thanks to Bont's resin which has taken 36 years to perfect so it is extremely stiff but pliable at relatively low temperatures. To mould your shoes, remove any cleats, laces or cleat mounting screws and innersole before moulding. Pre-heat the oven to 70C/160F. Place the shoe in the oven for 20 minutes. Higher temperatures will void your warranty and may damage your boot. Let them cool a little and test the shoe temperature with your hand before placing your feet in the shoes. Tighten the straps and allow to cool. If you have any lumps or bunions on your feet or if there are any areas causing discomfort, while the shoe is hot you can use the round end of a screwdriver to press out any part of the boot. You can heat mould the shoes as many times as you like.
A last is a replica of a foot that the cycling shoe is built around. Last makers do not make cycling shoe lasts, they only make shoe lasts so perfecting a cycling shoe last requires a great deal of expertise in functional biomechanics and ongoing research. Bont have been perfecting their performance footwear lasts since 1975 and the process is ongoing which is why they believe that Bont cycling shoes continue to be a leader in providing the most functional and correct anatomical support to cyclists than any other brand on the market. Their motto in terms of cycling shoe fit is simple, "We make shoes for cycling, not walking."
Over pronation is one of the main contributors to incorrect tracking of knees during a cyclists pedalling phase due to internal rotation of tibia and femur. This can result in knee injuries. In addition, the rotation of tibia/femur can cause the pelvis to tilt resulting in lower back strain. Structural medial longitudinal arch support is provided to stop over pronation of feet. This is also supported by Bont's Lateral Forefoot Support.
|EU Shoe Size|
|US Shoe Size||US Male Shoe||5||6||6.5||7||7.5||8||8.5||9||9.5||10||10.5||11||11.5||12||12.5||13||14|
|Standard width||mm||87 - 95mm||88 - 97mm||89 - 98mm||91 - 100mm||92 - 102mm||93 - 103mm||94 - 105mm||96 - 106mm||97 - 107mm||98 - 108mm||100 - 110mm||101 - 111mm||102 - 113mm||104 - 114mm||105 - 116mm||106 - 117mm||107 - 119mm|
Bont Size Chart To find your size, place a tape measure and piece of paper on a flat surface up against a wall. With your heel approximately 1mm away from the wall, stand on the tape measure, slowly roll your weight forward and onto the forefoot while keeping your heel firmly connected to the floor. Look down and take the measurement from the wall to your longest toe. Record the length. With your foot still in place, use a straight edge in a vertical position and place it up against the widest part of both sides of the foot. Measure the width across the widest part of your foot and record the number in millimetres. Repeat this step for both feet.
If you're unable to do this yourself, have someone take the measurements while you focus on keeping the entire foot connected to the ground at all times.
Once the measurements have been taken, first use the horizontal MM scale on the size chart to find your size (length). The MM sizes on the chart are the exact length of the last that Bont uses to build the shoes. If you find that your MM size is exactly the same as a value on the size chart, you may want to select one size bigger to give your toes some room. For example, you measure your feet and the length of your left and right feet are 278mm and 280mm respectively. If you were browsing for a Helix, Riot+ Series, Vaypor S or other models from the top line size chart you would be exactly size 44.5. However, as stated, this is the exact length of the shoe last and unless you like your shoes to be very tight, you may wish to add an additional 5-8mm onto your measurements to account for toe room and sock thickness. This will result in the most appropriate size. In this case, you would select a size 45.
Following the selection of size (length), move downward to select the most appropriate width. Bont recommends adding 1mm to find the most appropriate width. For example, you are looking at a Vaypor S and have determined your best shoe size is 45 – accounting for the additional length added to your foot measurements. Your widths are 105mm and 107mm respectively and so, with an additional 1mm added, you would still fit within the Standard Fit. If your feet measured narrowed than 100mm or wider than 110mm, you would consider Narrow Fit or Wide Fit.
RETURNS INFORMATION: Please note that once the shoes have been heat moulded, we cannot accept them back as a return under any circumstance.
The delivery options available for shipping this product along with the contents of your basket to USA are:
We will happily refund any item purchased on Wiggle if returned to us within 365 days; excluding Wiggle gift vouchers, nutrition and customised products, except when faulty.
Please note: Bikes and other bulky items cannot be returned using our local returns service (where applicable). Please contact us and we can arrange to collect these from you using our discounted courier rates. There is a fee for all collections, except for faulty products.
Please also note, if you have ordered a Shimano, Garmin, Suunto, Mizuno or Salomon product this may have been sent from our Australian warehouse. For products sent from our Australian warehouse, to arrange a return please contact customer services directly via our Contact Us Form or follow the return slip instructions received in your order.Returned goods must be unused and supplied with their original packaging, unless the goods are faulty. Wiggle will pay the return postage costs for any faulty items.